Longhorn Reloaded Build 4074 CD 32-BIT _ Hàng hiếm kịch độc

[Se7en]

Windows này là phiên bản thử nghiệm của Windows Vista, lấy tên mã là LONGHORN. THeo nhiều người đã từng dùng qua thì cho rằng Windows này đã hơn cả Vista vì có 1 số chi tiết nó làm đẹp hơn. Các bạn thử xem qua đoạn clip sau về Longhorn (một phiên bản khác phiên bản của bài viết này nhưng cũng là Longhorn).

Requirements:
Longhorn 4074 ISO or Longhorn Reloaded ISO
7.5GB of IDE disk space or above
800MHz Processor or above
ATi Radeon 9250 or Higher Graphics Card or nVidia Equivelant
512MB or more of RAM

Step 1 - Disk Preparation:
As you are likely to want to keep your existing operating system when installing Longhorn Reloaded, we must create a new partition of 7.5GB or above. If you already have an unused partition then move onto step 2.

Step 2 - ISO Preparation:
Either Burn your ISO to a disk using a CD Authiring software or mount the disk using alcohol 120%. When the disk has been burnt or mounted browse the disk and open Setup.exe and select 'Install'.
A new window should open.

Step 3 - Configuration:
Here you can select where you want to install Longhorn Reloaded and you can select your computername

Step 4 - Installing:
In this step the Setup does all itselve. Sooner or later you have to enter your Product K.@.y. Just use the Longhorn 4074 one.
Later we will make an unatended instalation.

Step 5 - Post Installation Configuration
Here you can configre all things.

Step 6 -Runonceexe:
Setup will install all our updates and fixes.

Step 7 - Last Reboot:
Now just reboot and you are done! Then your system is successfully installed.

Driver Installation:

How to Install xxx Driver for All Builds:
As a general guideline, you can try running the driver setup under Compatibility Mode (e.g. Windows XP) -or- try using the INF file directly.

How to Install ATI Display Driver for All Builds:
NOTE: This example is based on the Radeon 9700 Pro card, but the steps would be similar for other cards. ATI

1. Download the latest OFFICIAL (non-beta) Catalyst drivers from .
2. Unpack the package, but DON'T install it.
3. Go to Device Manager -or- Hardware and Devices.
4. Right click on Radeon 9700 Pro.
5. Select Update Driver.
6. Choose to "Install from a list or specific location".
7. Check "Search for the driver in these locations".
8. Click "Include this location in the search:", and use Browse to select the path where the driver was previously unpacked.
9. Press next and it should update files.
10. Don't restart and do the same for 9700 Pro secondary.
11. Restart.
12. Install Control Panel normally from the unpacked folder.

How to Install nVidia Display Driver for All Builds:
1. Download the display driver for Windows XP from nVidia.
2. Extract the contents of the setup file with WinRAR.
3. From the desktopm, right click Properties, select the Settings tab, then click the Advanced button.
4. Now click the Adaptor tab, then click the Properties button.
5. Click the Driver tab, then click the Update Driver button.
6. Select the driver nv4_disp from the folder where you extracted the driver files to. Everything WILL install.
7. Restart your computer, then everything should be fine.

Installation on SATA Drives:
We have mannaged to install Longhorn Reloaded on SATA Hard Disk Drives [/b]

	[Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ]